What does whole-house backup mean?
Short answer
Whole-house backup means every circuit in the home, including 240V loads like a well pump, range or central air, stays powered during an outage. A whole house solar generator needs enough continuous and surge output for those loads, 120/240V split-phase power, transfer equipment installed by an electrician, and enough stored energy for the outage length.
Essential loads or whole-home coverage
Most "whole home" systems in practice back up an essential-loads panel: a subpanel with the circuits that matter (fridge, lights, outlets, internet, furnace blower, well pump), while the dryer, range and central air are left off or managed. True whole-home coverage means every breaker stays live, which takes much more output and storage.
How load panels and transfer switches change coverage
- Manual transfer switch: an electrician wires selected circuits to a switch. In an outage you connect the station and flip the circuits to backup. Covers the circuits you chose.
- Home power panel or smart panel: maker-specific panels (Anker Home Power Panel, EcoFlow Smart Home Panel) that connect the station to chosen circuits, often with automatic switchover and app control.
- Installed battery with gateway or backup interface: a contractor-installed system that isolates the home from the grid and powers the backup panel or the whole home automatically.
The three routes to whole-home backup
| Route | Example equipment | Typical coverage | Installer needed |
|---|---|---|---|
| Large power station(s) + transfer switch | Two Growatt HELIOS 3600 units in parallel for 240V | Chosen circuits including some 240V loads | Electrician for the switch |
| Expandable station system + maker home panel | EcoFlow TITAN 5000 Classic + Smart Home Panel 10 (120V); EcoFlow DELTA Pro Ultra X | Essential-loads panel, expandable toward whole home | Electrician |
| Installed home battery + solar | Installed systems such as the BLUETTI EP900 (BLUETTI EP900 product page) | Backup panel or whole home, by design | Solar or electrical contractor |
Sizing for whole-house backup
Output: continuous, surge and voltage
Add the running watts of everything that could run at once in your backup panel, and identify the largest motor start (often a well pump or air conditioner compressor). Your system's continuous output must exceed the running total and its surge must cover the biggest start on top of it. Many of these loads are 240V, so the system must supply split-phase 120/240V, from one unit or from units paired as the maker allows.
Energy: days of autonomy
Whole-home energy use is far higher than an essentials plan. Your utility bill shows monthly kWh; divide by 30 for a daily average, and remember that heating and cooling seasons are higher. NREL's guidance frames this as power, energy and autonomy, and recommends sizing each separately (NREL: Technology Tips for Solar + Storage (PDF)).
Example: a home using 30 kWh a day on average would need about 30 / 0.85 = 35 kWh of rated storage for one day with no solar, by our planning assumption. That is several large expandable batteries, which is why most designs back up an essential-loads panel and use solar to recharge.
| Daily use | Rated storage for 1 day (85% usable) | Example of what that implies |
|---|---|---|
| 10 kWh (essentials panel) | About 11.8 kWh | Two to three large expandable batteries |
| 20 kWh | About 23.5 kWh | A multi-battery system |
| 30 kWh (whole home, mild season) | About 35.3 kWh | A large multi-battery system plus solar recharge |
Solar recharge
Backup that lasts beyond one or two days depends on solar. The DOE notes that grid-tied solar may shut down during an outage unless the inverter and storage are configured for backup (DOE). Ask any installer to confirm in writing that the panels will charge the battery while the grid is down.
Systems compared
| Model | Best for | Capacity | Output | Voltage |
|---|---|---|---|---|
| Growatt HELIOS 3600 | 240V with two units | 3,600Wh | 3,600W | 120V (240V with 2 units) |
| EcoFlow TITAN 5000 Classic | Automatic switchover for 120V circuits | 5,017Wh | 4,000W | 120V |
| EcoFlow DELTA Pro Ultra X | Largest system here | 12,288Wh | 12,000W | Whole-home system |
| Jackery HomePower 3000 | 3,072Wh LFP battery | 3,072Wh | 3,600W7,200W peak | 120V |
Whole-home capable systems
240V with two units
Growatt HELIOS 3600
3,600Wh and 3,600W per unit, expandable to 36kWh; the listing states that two units in parallel give 240V/7,200W and can serve a home through a transfer switch. This is the in-stock route to 240V loads such as a well pump.
The listing states
- 3,600Wh LFP battery, 3,600W output
- Two units in parallel give 240V/7,200W (listing)
- Expandable to 36kWh, 2,000W solar input
Check before you buy
- Cost of two units plus the transfer switch and electrician
- 240V requires two units and a transfer switch installed by a licensed electrician.
Amazon listing B0DF7SZJWY, details checked November 21, 2026 on the Amazon listing.
Automatic switchover for 120V circuits
EcoFlow TITAN 5000 Classic
5,017Wh LiFePO4, 4,000W, expandable from 5kWh to 30kWh, with under-20ms automatic switchover through EcoFlow's Smart Home Panel 10 (120V), per the listing. A modular way to build toward an essential-loads panel.
The listing states
- 5,017Wh LiFePO4, 4,000W AC output
- Expandable from 5kWh to 30kWh
- Under 20ms automatic switchover with EcoFlow Smart Home Panel 10 (120V)
Check before you buy
- It is 120V; plan 240V loads separately
- The Smart Home Panel 10 is sold separately and must be installed by an electrician.
Amazon listing B0HJZSDJZP, details checked November 21, 2026 on the Amazon listing.
Largest system here
EcoFlow DELTA Pro Ultra X
12,288Wh (one inverter and two batteries) and 12,000W of output, expandable to 180kWh, with under-20ms switchover, per the listing.
The listing states
- 12,288Wh (1 inverter + 2 batteries)
- 12,000W output, expandable to 180kWh
- Under 20ms switchover, per the listing
Check before you buy
- Installation and integration needs
- Limited stock shown on the listing
- The inverter and battery ship in separate packages. Listing shows limited stock.
Amazon listing B0GQGZ5J8N, details checked November 21, 2026 on the Amazon listing.
For a ranked list with a scorecard, see the best whole house solar generator systems. For pricing factors, see whole house solar generator prices.
Whole-house solar vs a standby fuel generator
A standby fuel generator runs as long as it has natural gas or propane, and handles big loads well, but it burns fuel, needs maintenance and must be installed outdoors to code. A battery system is silent and emission-free at the house but limited by storage and sun. Our solar standby generator guide compares the two in detail. For portable fuel generators, the CPSC rules apply:
Fuel generator safety. If your plan includes a gas or propane generator, the CPSC says to run it outdoors only, at least 20 feet from the house, with the exhaust pointed away from windows, doors and vents. Never run one inside a home or garage, even with the door open, and install battery-powered carbon monoxide alarms. Source: U.S. Consumer Product Safety Commission generator safety warning.
Load management makes smaller systems go further
You do not have to back up every load at full power to get whole-home comfort. Smart panels and some home panel kits can shed lower-priority circuits automatically when the battery runs low, or let you turn them off from an app. Running the dryer, oven and water heater only when solar is producing, or not at all during an outage, can cut a system's required size dramatically.
Questions before you commit
Before you buy
- Which circuits do I actually need backed up, and what do they draw at once?
- Do any of them need 240V, and what are their starting currents?
- How many hours or days of autonomy do I want, and does my sun support recharging?
- Which transfer equipment does the maker support, and what will the electrician charge?
- Will rooftop solar charge the battery during an outage in this design?
- What permits and utility approvals are needed?
Not ready for whole-home? A portable solar generator covers essentials without installation. The home solar generator guide explains the basics behind all of this.
Bottom line
Whole-house backup is a design, not a product: 120/240V output, enough continuous and surge power for your panel's loads, transfer equipment installed by an electrician, and storage plus solar sized to your outage length. Most homes get the best value by backing up an essential-loads panel and managing big loads like dryers and ranges.
Sources
- U.S. Department of Energy: Homeowner's Guide to Going Solar
- U.S. Department of Energy: Solar and Resilience Basics
- U.S. Department of Energy: Solar Energy and Storage Basics
- NREL: Technology Tips for Solar + Storage (PDF)
- U.S. Consumer Product Safety Commission generator safety warning
Product specifications come from the Amazon listing for each model, checked on the date shown in its card. Confirm current details on the listing or the manufacturer's manual.