Solar Backup Generator: Portable Station or Installed Storage?

"Solar backup generator" covers two very different things: a portable battery station you recharge with folding panels, and an installed battery wired to rooftop solar and your electrical panel. Both keep power on in an outage. They differ in what they cover, how they switch over, who installs them and what they cost. This guide lays the options side by side so you can pick the right tier.

Our top pick

Chosen from listing specs for this guide. Full comparison below.

Portable tier, panel included

EcoFlow DELTA 3 with 220W bifacial panel

  • Station and solar panel in one box, ready for multi-day outages
  • 220W bifacial panel refills it in about 5.8 hours of sun, per the listing
  • Expandable to 5kWh with EcoFlow extra batteries

Check price on Amazon

What counts as a solar backup generator?

Short answer

A solar backup generator is any battery system that supplies power during an outage and can be recharged by solar panels. That includes portable power stations with folding panels, expandable stations connected to home circuits through a transfer switch, and installed home batteries paired with rooftop solar. None of them provides uninterrupted, unlimited power; each is limited by stored energy and sun.

Portable battery station

A self-contained unit you plug appliances into, recharged from the wall before an outage and from portable panels during one. No installation. Good for essentials through extension cords.

Installed solar-plus-storage

A home battery wired into your electrical system, usually with rooftop solar, designed and installed by a contractor. It can switch over automatically and power an essential-loads panel or more. The DOE notes that grid-tied solar alone may shut down in an outage; backup needs a suitable inverter and storage configured for it (DOE: Solar and Resilience Basics).

The middle tier: expandable stations with transfer equipment

Large stations with 120/240V output and supported transfer switches or home panels bridge the two. You buy the station; an electrician installs the switch or panel; the station feeds chosen circuits with one cable. The EcoFlow TITAN 5000 Classic with its Smart Home Panel 10, and two Growatt HELIOS 3600 units with a transfer switch for 240V, are examples.

Options compared

General comparison. Coverage and switchover depend on the specific system design.
Portable station + panelsExpandable station + transfer switchInstalled solar + storage
CoveragePlugged-in appliancesChosen circuitsEssential-loads panel or whole home, by design
SwitchoverManual (or UPS for one device)Manual or automatic, depending on equipmentUsually automatic
240V loadsRarelySome models (120/240V)Yes, by design
InstallationNoneElectrician for the switch or panelContractor, permits, utility interconnection
Recharge during outagePortable panelsPortable or fixed panels, as supportedRooftop solar, if configured to charge off-grid
Cost rangeLowestMiddleHighest

We do not publish dollar figures for installed systems here, because quotes vary widely by region, home and equipment. Get several dated quotes and compare them line by line.

Which tier fits your outage risk?

  • Occasional short outages, essentials only: portable station and panels.
  • Regular outages, or a well pump, sump pump or furnace blower to keep running: expandable station with an electrician-installed transfer switch.
  • Long regional outages, or a household that cannot be without power: installed solar plus storage, designed for your loads.

If anyone depends on powered medical equipment, plan with the device maker or your provider and treat automatic switchover as a priority. Ready.gov's outage guidance covers this (Ready.gov: Power Outages).

Sizing any solar backup system

  1. List must-run loads and their running watts. Total them for the output requirement.
  2. Multiply watts x hours per day and add. This is daily energy.
  3. Rated capacity = daily energy x days of autonomy / 0.85 (our planning assumption for losses).
  4. Solar to break even: daily energy / (peak sun hours x 0.75 derate). Check your sun with NREL PVWatts.
  5. Check surge for motors, and whether any load needs 240V.

Example: 1,940Wh a day of essentials with 4 peak sun hours needs about 2,280Wh of capacity for one day and about 650W of panels to break even daily, by our rough method. Try your own list in the runtime calculator.

Solar generator runtime calculator

The starting list is a typical household example (average fridge, three room lights, a few kitchen appliances, phone and laptop chargers). Edit, remove or add lines: enter running watts from the label or manual and how many hours a day each one actually draws power.

Formula: daily energy (Wh) = sum of watts x hours per day. Usable energy = capacity x usable share. Runtime (days) = usable energy / daily energy. Peak load = sum of running watts of everything that can run at once; compare it with the station's continuous AC rating, and check starting watts for motors and compressors separately. The 85% default is our planning assumption, not a measured figure: real losses change with load, temperature, settings and model.

Solar backup picks by tier

Picks by tier

Portable tier, panel included

EcoFlow DELTA 3 with 220W bifacial panel

The EcoFlow DELTA 3 (1,024Wh LFP, 1,800W AC) with a 220W bifacial panel in the bundle, per the listing, which says the panel fully recharges it in about 5.8 hours of sun. Expandable to 5kWh.

The listing states

  • 1,024Wh LFP battery, 1,800W AC
  • 220W bifacial solar panel and MC4 cable included
  • Listing: full solar charge in 5.8 hours with the 220W panel

Check before you buy

    Check price on Amazon

    Amazon listing B0F9WJDRJ2, details checked November 21, 2026 on the Amazon listing.

    Middle tier, automatic switchover

    EcoFlow TITAN 5000 Classic

    5,017Wh and 4,000W, expandable to 30kWh, with under-20ms automatic switchover for chosen 120V circuits through EcoFlow's Smart Home Panel 10, per the listing.

    The listing states

    • 5,017Wh LiFePO4, 4,000W AC output
    • Expandable from 5kWh to 30kWh
    • Under 20ms automatic switchover with EcoFlow Smart Home Panel 10 (120V)

    Check before you buy

    • Installed cost and which circuits it can serve
    • The Smart Home Panel 10 is sold separately and must be installed by an electrician.

    Check price on Amazon

    Amazon listing B0HJZSDJZP, details checked November 21, 2026 on the Amazon listing.

    Middle tier, 240V with two units

    Growatt HELIOS 3600

    3,600Wh and 3,600W per unit; the listing states two units in parallel give 240V/7,200W through a transfer switch, for split-phase loads such as a well pump. Expandable to 36kWh.

    The listing states

    • 3,600Wh LFP battery, 3,600W output
    • Two units in parallel give 240V/7,200W (listing)
    • Expandable to 36kWh, 2,000W solar input

    Check before you buy

    • Cost of two units plus installation
    • 240V requires two units and a transfer switch installed by a licensed electrician.

    Check price on Amazon

    Amazon listing B0DF7SZJWY, details checked November 21, 2026 on the Amazon listing.

    Upper tier, whole-home scale

    EcoFlow DELTA Pro Ultra X

    12,288Wh and 12,000W per the listing, expandable to 180kWh, with under-20ms switchover. Close to an installed battery in scale.

    The listing states

    • 12,288Wh (1 inverter + 2 batteries)
    • 12,000W output, expandable to 180kWh
    • Under 20ms switchover, per the listing

    Check before you buy

    • Installation needs
    • Limited stock shown on the listing
    • The inverter and battery ship in separate packages. Listing shows limited stock.

    Check price on Amazon

    Amazon listing B0GQGZ5J8N, details checked November 21, 2026 on the Amazon listing.

    Whichever tier you choose, start from the loads, not the product. Our solar power station explainer covers how the parts work if any term on a listing is unfamiliar.

    Questions to ask an installer

    Ask before you sign

    • Which circuits will be backed up, and why those?
    • What continuous and surge output does the design provide, and at what voltage?
    • How does switchover work: automatic or manual, and how long does it take?
    • Can the battery recharge from solar during a grid outage with this configuration?
    • What permits and utility approvals are needed, and who handles them?
    • What warranty covers the battery, inverter and the installation work, and for how long?
    • Is the quote dated, itemized and specific about equipment model numbers?

    Keeping a solar backup system ready

    Batteries that sit unused still need attention. Keep portable stations charged at the level the manual recommends and top them up every few months. Run a real test a few times a year: switch your must-run loads to the backup for an hour and note what happens. For installed systems, check the app or monitoring portal for battery health and reserve settings, and keep the backup reserve high during storm season. Clean portable panels and check cables for damage before you need them.

    Limits to be honest about

    • No battery system provides unlimited power. Cloudy weeks drain any battery.
    • Switchover is not always seamless. Portable units usually need you to move plugs; some transfer setups switch manually.
    • Heating, cooling and electric cooking use large amounts of energy; even big systems may need load management.
    • Installed systems need permits and, if grid-tied, utility approval.
    • Battery capacity fades slowly with age and cycles, so leave a margin when you size the system.

    Fuel generator safety. If your plan includes a gas or propane generator, the CPSC says to run it outdoors only, at least 20 feet from the house, with the exhaust pointed away from windows, doors and vents. Never run one inside a home or garage, even with the door open, and install battery-powered carbon monoxide alarms. Source: U.S. Consumer Product Safety Commission generator safety warning.

    Next: compare whole house solar generator options, read about solar standby generators, or see the best solar generators for home.

    Bottom line

    Pick the tier that matches your outage risk, not the biggest system you can afford. A portable station with panels covers essentials for most households; an expandable 120/240V station with an electrician-installed transfer switch covers circuits and pumps; installed solar plus storage suits homes that need automatic, long-duration coverage. Size each tier with the same steps: running watts, daily watt-hours, days of autonomy and solar to break even.

    Sources

    Product specifications come from the Amazon listing for each model, checked on the date shown in its card. Confirm current details on the listing or the manufacturer's manual.

    Frequently asked questions

    What is the best solar backup generator for home?

    It depends on the tier. A portable station with panels suits essentials; an expandable 120/240V station with a transfer switch suits circuit backup; installed solar plus storage suits homes that need automatic, larger coverage.

    Will a solar backup generator power my house automatically?

    Installed systems and some transfer setups can switch automatically. Portable stations usually need you to plug appliances in, though UPS modes can switch one device instantly.

    Do I need rooftop solar for a solar backup generator?

    No. Portable and expandable stations can use portable panels or charge from the wall. Rooftop solar becomes relevant for installed storage.

    What if...? Real-life scenarios

    Common situations for this topic, with the product we would start with and the math behind it. Appliance figures are examples: check your own labels.

    What if I already have rooftop solar?

    Ask your installer about adding storage configured for backup. Without it, grid-tied panels typically shut down during an outage.

    What if I want backup without an installer?

    Stay in the portable tier: a station with panels, such as the EcoFlow DELTA 3 with 220W panel, plugs in with no wiring work.

    What if I want my home to switch over automatically?

    The EcoFlow TITAN 5000 Classic lists under-20ms automatic switchover with EcoFlow's Smart Home Panel 10 (120V), installed by an electrician.

    What if I need 240V circuits?

    Two Growatt HELIOS 3600 units in parallel give 240V/7,200W per the listing, connected through a transfer switch.

    What if my roof cannot take more panels?

    Use ground-mounted or portable panels. The EcoFlow DELTA Pro Ultra X listing describes repositioning ground-mount panels seasonally for better output.

    What if I might move house?

    Portable and expandable stations move with you. The EcoFlow DELTA Pro Ultra X listing says it can be unplugged and taken along when you move.

    What if I also want lower electricity bills?

    Some systems shift usage to off-peak hours: the EcoFlow TITAN 5000 Classic lists AI-powered energy management for this. Check your utility's time-of-use rates first.

    What if my utility will not approve a grid-tied system?

    Portable stations are not interconnected with the grid, so they do not need utility approval. They power what you plug in.

    What if I only care about one or two circuits?

    A mid-size station plus a small manual transfer switch, installed by an electrician, is often enough. Size it with the steps on this page.

    What if outages are rare where I live?

    Keep it simple and affordable: a compact or mid-size station such as the EcoFlow DELTA 3 with 220W panel covers short outages and doubles as camping power.